<p id="b1hr9"><ins id="b1hr9"></ins></p>

        <form id="b1hr9"></form>

          咨詢熱線: 13896006908

          Contact us 聯系我們

          重慶豐正機械有限公司

          聯系人:朱經理

          手機:13896006908

          電話:023-67188505

          傳真:023-67188506

          地址:重慶市渝北區回興工業園區蘭馨大道2號

          可調多軸器

          (中切削)U型圓型可調多軸器

          (Medium cutting)Type U round shaft multi-spindle tool

          ◎本體結構利用齒輪箱配合萬向節頭所組成,容易調整加工孔距不受齒輪所限制,節省調整的時間,也少有死角的限制,適合加工接近圓周分布孔的工作,是可調式中最容易操作使用的規格。為保萬向節頭之壽命,移動范圍不得超過15度,等于垂直之前後左右30mm以內。

          (盡量配合工作之孔距坐標,設計齒輪箱結構即定鏜孔位)The distance of hole will be easy to control and not to be restricted by gears.

          ◎The basic frame consists of gear case and cardan joint.The distance of hole will be easy to control and not to be restricted by gears.The set up time is thus saved and it is mostly free of dead angles.It is very suitable for working of round holes and is the easiest tooperate among the adjustable type.To ensure the lifetime of the cardan joint,the moving range should be confined within 15 degrees,which means within a distance of 30mm to the vertical status.

          (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

          咨詢熱線:

          13896006908

          在線咨詢
          規格參數

          ※萬向節注意事項:

          1調整時不能超過規定的角度15度

          2如超過此極限。心軸易磨損或斷裂

          3工作時應經常加潤滑油脂

          ※Note of cardan Joint

          1.Do not set the angle to more than the specifled l5 degrees.

          2.If the limit is exceeded,the shaft will be easy to wear or break.

          3.During work,lubrication should be added frequently.

          型號 Type

          SU80

          SU110

          SU165

          SU200

          SU250

          SU300

          筒夾規格Collet/

          最大鉆孔能力

          Max.Drilling Capacity

          D4

          ER8/5  C5/5

          ERll/7 C6/6

          ERl6/10 C9/9

          ER20/13

          C12/12

          ER8/5  C5/5

          ERll/7 C6/6

          ERl6/10 C9/9

          ER20/13

          C12/12

          ER8/5  C5/5

          ERll/7 C6/6

          ERl6/10 C9/9

          ER20/13

          C12/12

          ER8/5  C5/5

          ERll/7 C6/6

          ERl6/10 C9/9

          ER20/13

          C12/12

          ER8/5  C5/5

          ER11/7 C6/6

          ERl6/10 C9/9

          ER20/13

          C12/12

          轉速比

          Gear Ratio

          1∶1

          1∶1

          1∶2

          1∶1

          1∶2

          1∶1

          1∶2

          1∶1

          1∶2

          1∶1

          1∶2

          最小距離(二軸間)

          Lowest Distance(Two Spindle)

          10

          13(ER8  C5)

          18(ER11 C6)

          26(ER16 C9)

          28(ER20 C12)

          13(ER8  C5)

          18(ER11 C6)

          26(ER16 C9)

          28(ER20 C12)

          13(ER8  C5)

          18(ER11 C6)

          26(ER16 C9)

          28(ER20 C12)

          13(ER8  C5)

          18(ER11 C6)

          26(ER16 C9)

          28(ER20 C12)

          13(ER8  C5)

          18(ER11 C6)

          26(ER16 C9)

          28(ER20 C12)

          最大軸心范圍

          Max.Range of Centers

          80

          110

          165

          200

          250

          300

          軸數Spindle

          2-4

          2-6

          2-10

          4-12

          4-12

          4-14

          掃一掃

          重慶豐正機械有限公司

          在線咨詢

          咨詢熱線:023-67188505

          QQ咨詢 QQ咨詢
          国产三级片在线超爽观看_国产高清AV_1024亚洲精品无码_91久久国产综合

              <p id="b1hr9"><ins id="b1hr9"></ins></p>

                <form id="b1hr9"></form>